off grid solar inverter 1000w 1500w 50HZ/60HZ 48v-240v power dc ac
inverter
Model : GI-15248
We promise you:
We only make standardized products.
When others are still upgrading hardware, We have upgraded the
software.
No complicated wires, no cluttered components, one DSP chip can
solve all your problems.
The core technology – exclusive and initiative DSP intelligent chip
We only use new and original electronic components, we refuse to
use the disassemble and secondary scrap pieces.
Inverter Applications:
Office equipment: computers, solid scanners, printers, fax
machines,
Copiers, projectors, lights, and other work.
Digital products: various mobile phone, digital camera, projector,
laptop.
Electrical equipment; television; fans, drinking fountains, vacuum
cleaners,
air conditioning, electric drill, refrigerator, microwave, blender
and so on.
| GI Series Low Frequency Pure Sine Wave Inverter (220V) |
| Model | GI-102 | GI-152 | GI-202 | GI-302 | GI-402 | GI-502 | GI-602 |
| Rated Power | 1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW |
| Peak Power | 3KW | 4.5KW | 6KW | 9KW | 12KW | 15KW | 18KW |
| Nominal battery voltage | 12/24VDC | 12/24/48VDC | 24VDC/48VDC |
| Input | DC input range | 10.5-15VDC (12V) / 21-30VDC (24V) / 42-60VDC (48V) |
| AC Mains input range | 170-275VAC (220/230/240VAC)±4% |
| AC input frequency | 50Hz: 45-65Hz / 60Hz: 55-65Hz±0.5Hz (50Hz/60Hz automatic
recognition) |
| Protection | Low battery alarm | ≤10.5VDC (12V) / ≤21VDC (24V) / ≤42VDC (48V) alarm |
| Low battery protection | ≤10VDC (12V) / ≤20VDC (24V) / ≤40VDC (48V) automatic shutdown |
| High battery alarm | ≥15VDC (12V) / ≥30VDC (24V) / ≥60VDC (48V) alarm |
| High battery protection | ≥17VDC (12V) / ≥34VDC (24V) / ≥68VDC (48V) automatic shutdown |
| Over load protection | 110%<loading<150%, shutdown after 60s alarm, loading>150%,
shutdown after 20s alarm |
| High temperature | Built-in temperature real time sensor, ≥85℃ alarm, ≥90℃ automatic
shutdown |
| Short circuit protection | Automatic shutdown |
| Output | Transfer efficiency | ≥92% |
| Output voltage | (DC battery mode) 220/230/240VAC±2% |
| Output frequency | (DC battery mode) 60/50Hz±1% |
| Output wave form | Pure sine wave |
| Output voltage | (AC mains mode) stable 220/230/240VAC±10% output (built-in AVR
stablizer) |
| AVR output stablizer | AC mains<170VAC±5% swtich to DC battery mode, AC mains>180VAC
±5% return to AC mains mode; |
| AC mains>275VAC±5% swtich to DC battery mode, AC mains<255VAC
±5% return to AC mains mode; |
| The above is for output 220V system reference, 230V/240V output
just multiply by percentage |
| Output frequency | (AC mains mode) automatic tracing from AC input |
| Other | Transfer time | ≤4ms |
| Display | LCD Display with function buttons |
| Cooling system | Intelligent cooling fan control system |
| ≤42℃ slow fan, ≥45℃ fast fan |
| AC Charger | 7 battery types mode | Gel U.S.A. / Gel European / A.G.M.1 / A.G.M.2 / Sealed lead acid /
Open lead acid / Calcium(open) / |
| Deep sulphation cycle 15.5 for 4 hrs |
| AC charging Voltage | 13.6-14.2VDC(12V)/27.2-28.4VDC(24V)/54.4-56.8VDC(48V) |
| AC charging current | 0-35A: 5A / 10A / 20A / 25A / 30A / 35A, 6 stages adjustable option |
| 3 Stages charging | Boost charging, direct charging, float charging |
| AC over charge protection | Battery voltage ≧16VDC (12V) ≧32VDC (24V) ≧64VDC (48V), stop
charging after 60s alarm |
Working mode
(Optional) | 01 | AC mains priority |
| Always use AC mains as priority input to provide AC output and
automatically charge the battery, only |
| stops charging when battery is fully charged, and only starts DC to
AC converting untill AC mains is off |
| 02 | Energy saving |
| Loading≤10% automatic shutdown, loading≥11%-100% automatic turn on |
| 03 | DC battery priority |
| Always use DC battery as priority input to provide AC output, for
12V system, when battery≥13V, starts |
| DC to AC converting; when battery≤10.5V during converting, switch
to AC mains mode to provide AC |
| output and automatically start charging the battery (for 24V/48V
system, multiply by 2/4 accordingly) |
| Comnunication | RS-232/USB/SNMP(additional option) |
| Environment | Temperature | -20~75℃ |
| Humidity | ＜95% |
| Appearance | Product size (mm) | 430*310*270mm | 600*270*200mm |
| Packing size (mm) | 540*350*300mm | 720*310*270mm |
| Net Weight (kg) | 15kg | 17kg | 24.5kg | 29kg | 44kg | 48.1kg | 49.5kg |
| Gross Weight (kg) | 16.5kg | 19kg | 27kg | 31kg | 46kg | 50.1kg | 52.2kg |
| *Product specifications are subject to change without further
notice |
Function and setting of panel button
ON/OFF Button:1,press for 3 seconds to turn on and 5 seconds turn
off.
Function Button:press the function button 5 seconds,then start
setting
PO-ON PO model press the function button 2 times to exit or in 10
seconds without function Exit Automatic. It Has P1,P2, P3, P4
4 working model, press up or down to setting.
Model P1-on left side P1 showing 01 AC charging first, 02 energy
saving model, 03 Battery charge first. Press up or down
choose the Working model and press the Function Button.
Model P2-Battery Type setting,press the Function Button, press up
or
down choose the battery type
Model P3-Charging Current 0-35A:from 0-20%-40%-60%-80%-100%,
Maximum is 35A,Minimum 0A
Model P4-Silent working setting: press the Function Button, Up or
down
for turn on/off the Buzzer.
